Can DVD player connect to cable box?

Can you hook up a DVD player to a Comcast cable box?

If you are using a Comcast cable box, you cannot use the DVD player unless you hook it up to your cable box so it plays on the “line input” channel of your television set.

Why does my TV say no signal when I plug in my DVD player?

If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port. Sometimes cable can short-out. … Test if your DVD player works on other TVs. It could be your DVD player breakdown that leads to No Signal on your HDTV.

What input should TV be on for DVD?

HDMI: The most modern connection, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and you only need one cord for both the audio and video. A/V Cables (Three-Prong): Standing for Audio/Visual cables, this the most common connection for DVDs.

Why won’t my DVD player work on my smart TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. … If not, the DVD player should be set to output an interlaced signal.

IT IS AMAZING:  Can a hard drive be melted?

Can you record cable TV with a VCR?

Using an antenna to record broadcast TV on a VCR is virtually the same process for a high definition television (HDTV) as with an analog TV. That’s because the TV tuner inside the VCR drives the recording process; it does not work with digital TV. To record cable TV with an old VCR, you will need a DTV converter box.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

Can I connect an old VCR to a new TV?

The short answer is yes! Most VCRs can hook up to most modern TVs, though you might have to buy a cable or two. For a long time, VCRs used coaxial cables. Those are basically the same cables that come out of your wall to plug in a cable or satellite box.

How do I hook up my DVD VCR to my TV?

Connect an S-Video cable to the “S-Video Out” port on your VCR/DVD combo player. Plug the opposite end of the S-Video cable to the “S-Video In” port on your TV. Connect a set of RCA audio cables to the red and white color-coded “Audio Out” jacks on your VCR/DVD combo player.