Can you hook up a DVD player to a Comcast cable box?

Can I hook up my DVD player to my cable box?

You can’t hook a DVD to a cable box. It doesn’t have inputs. If the cable box is connected to the antenna jack on the TV and that’s the only connection you will need an AV RF modulator.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

How do you hook up a VCR to a smart TV with a cable box?

Connect a second coaxial cable on the back of the cable box using the “RF OUT” and connect the other end of this cable to the back of the VCR using the “RF IN” jacks. Connect the third coaxial cable to the back of the VCR in the “RF OUT” with the other end connected to the back of the television’s “RF IN” jack.

IT IS AMAZING:  How do you get a stuck DVD tray out?

Why does my TV say no signal when I plug in my DVD player?

The DVD may be putting out on the composite video output by default. Leave the component cables in place and add that connection so you can see the on screen menu. Then change it to component.

What input should TV be on for DVD?

HDMI: The most modern connection, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and you only need one cord for both the audio and video. A/V Cables (Three-Prong): Standing for Audio/Visual cables, this the most common connection for DVDs.

Why won’t my DVD player work on my smart TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. … If not, the DVD player should be set to output an interlaced signal.

Can a VCR be connected to a smart TV?

Connect a VCR with HDMI only on the TV

Therefore you need to use one of the HDMI inputs on the TV. However you can’t connect your VCR directly to the TV. You need a converter box between the VCR and the TV. The yellow, red and white lead from the VCR plugs into the input of the converter box.

Can you use a VCR with a smart TV?

Anyway, yes—it is possible to hook up your old VCR player to a new HDTV, even if your VHS deck doesn’t have an HDMI video output (which I’m almost positive it doesn’t, unless you happen to have a newer DVD/VCR combo player). … An S-Video cable, which delivers a slightly sharper picture than composite video does.

IT IS AMAZING:  How do I change my DVD player region 4?

Can I connect an old VCR to a new TV?

The short answer is yes! Most VCRs can hook up to most modern TVs, though you might have to buy a cable or two. For a long time, VCRs used coaxial cables. Those are basically the same cables that come out of your wall to plug in a cable or satellite box.