How do I connect my portable DVD player to my Smart TV?

How do I connect my portable DVD player to my TV?

How to Get TV on Portable DVD Player

  1. Check your DVD player to see if you have RCA connecting ports (red, yellow and white). …
  2. Connect a digital converter box (can be found at most electronic stores for around $40). …
  3. Connect the antenna into the converter box’s “In” port.

How do you hook up a DVD player to a smart TV without HDMI?

Connect the composite video cable (Yellow RCA) to the DVD player. Next, connect the White and RED audio RCA cables to the corresponding connectors on the back of the DVD player. Take the other side of the composite cable and audio cables and connect them to your TV.

How do I get my TV to recognize my DVD player?

To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.

IT IS AMAZING:  Best answer: What size hard drive do I need for my desktop?

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

What kind of DVD player works with a smart TV?

All Blu-ray players have an HDMI output, which allows you to connect your player to the Smart TV. You can also set your player to only connect the video to the TV, so you can plug your RCA outputs to your sound system.

Why won’t my DVD player work on my smart TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. … If not, the DVD player should be set to output an interlaced signal.

Can you use a DVD player without HDMI cable?

1) Your DVD player doesn’t have HDMI, but it does have component video. This is a set of three RCA plugs (Red/Green/Blue) for video and a set of two RCA plugs (Red/White) for audio. 2) Your TV supports component input – it has a matching set.

Why does my TV say no signal when I plug in my DVD player?

If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port. Sometimes cable can short-out. … Test if your DVD player works on other TVs. It could be your DVD player breakdown that leads to No Signal on your HDTV.

IT IS AMAZING:  Can I use my WD Passport on both Mac and PC?

How do you watch a DVD on a smart TV?

Step 1: Just connect the DVD player directly to your smart TV with an HDMI-cable. Step 2: The screen would pop up one signal, and the player could recognize the tv-screen as an HDMI recipient. And then you could play DVD videos on your smart tv directly.

How do I connect my old DVD player to my LG Smart TV?

Turn both devices around, plug in their power cables and turn both devices on. Press the “Input” button on your television’s remote control or on your television’s front panel until “HDMI” or “HDMI 2,” or “AV” or “AV 2” or “Component” is displayed on its screen and you see the LG logo transmitting from the DVD player.

Can I connect DVD player to TV with USB?

Although many computers and some televisions have built-in DVD players, some do not. If your computer or television lacks an internal DVD player, you can connect one to the USB, FireWire or auxiliary audio/video port.

Can you get Scart to HDMI cables?

Yes, a SCART to HDMI will work with any SCART device, including DVD players. In fact, it’s the main reason people buy these adapters. Many people have VHS and DVD combo players that are a little dated, and they need a way to connect them to their TVs.