How do I program my DIRECTV remote to my Samsung Blu Ray player?

DIRECTV Setup Codes

Can my DIRECTV Genie remote control my DVD player?

The DIRECTV universal remote can come in two versions: Standard Universal Remote or Universal RF Remote. Regardless of the type, the setup is the same. With the DIRECTV Universal remote, you can control up to four different devices – your DIRECTV receiver, your VCR or DVD player, and your TV.

How do I pair my Samsung Blu-ray remote?

Press and hold the SETUP button until the red indicator light stays on (approximately 2 seconds) and then release the SETUP button. 4. Press and release the desired device button on the remote (DVD/BLU-RAY). The red indicator will blink once and then remain on.

Can you program a DirecTV remote to a Blu Ray player?

Your DIRECTV universal remote control can control up to four devices, including DVD/Blu-ray players, DVRs, gaming consoles, soundbars, and TVs.

How do I change my directv remote to HDMI?

If you need to change the input on your TV while watching DIRECTV, or if you just don’t want to drag out the TV remote, press and hold the ENTER button (to the right of the zero) for about two seconds to bring up the menu to change your TV’s input.

IT IS AMAZING:  Can you use WD 40 as easy start?

How do I find my Direct TV code?

Press MENU on your remote. Select Settings > Remote Control > Program Remote. Choose the device (TV, audio, DVD) you wish to program. If you don’t see your TV or device listed, use the code lookup tool to find the 5-digit code.

What is 4 digit code for Samsung TV?

The generic PIN for Samsung TVs is 0000 – or four zeros.

How do you program a remote to a Samsung TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do I program my directv Genie remote without a receiver?

Press both the Enter and Mute buttons on your remote control while pointing it at your television. Hold these two buttons until your device’s light indicator turns and blinks green twice. Step 2. Afterward, you will receive the “Applying IR/RF Setup” message on your screen, indicating that your set up is ready.

How do I program my directv genie universal remote?

Point the remote at your Genie HD DVR, Genie Mini, or Wireless Genie Mini. Press and hold the MUTE and ENTER buttons. Stop when the green light at the top of the remote blinks twice. When the TV screen displays Applying IR/RF setup, you are in RF mode and ready to program the remote.

IT IS AMAZING:  Do PC CD roms work on laptops?

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.

The next steps will depend on your TV menu options:

  1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
  2. Select Remote control — Connect via Bluetooth.
  3. Select Voice Remote Control — Activate button.

Is there an app for Samsung Blu-ray remote?

The app is also available for Android devices. The Samsung Remote app enables Wi-Fi remote control of Samsung Smart TVs sold since 2011 using such devices as your iPhone.

How do I program my remote to my Blu Ray player?

How to Program a Universal Remote Control for using Blu Ray Player.

  1. Manually turn on the blu ray device you wish to program.
  2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
  3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.).

How do I reset my Samsung Blu-ray remote?

[Solution]

  1. 1) Open the battery compartment on the back of the remote and remove both batteries.
  2. 2) Press and hold any button on the remote for 20 Seconds.
  3. 3) Release the button and reinsert the batteries properly.