How do I program my Samsung remote to my LG DVD player?

Can my Samsung TV remote control my DVD player?

If your Samsung remote control has a “Mode” or “Set” button, it is a universal remote control. You can program your remote control to operate your DVD player, cable box, satellite receiver and VCR.

Is my Samsung remote universal?

The remote controls of Samsung TVs are not universal, and they aren’t interchangeable. However, you can get a replacement remote, a universal remote, or a remote control app on your smart device.

Can I program my TV remote to my DVD player?

How to connect a universal remote to a TV, DVD player or Blu Ray player: Turn on the device. On the remote control, press the corresponding device button – “TV”, “DVD” or “AUX.” … For the second digit of the code press “2” on the remote number pad and then count the number of times the device button blinks.

How do you program a Samsung universal remote?

Follow the steps below to set up MBR manually.

  1. Press the Home button and then select Universal Remote on the Source menu.
  2. Select New Device.
  3. Choose the Device Type on the TV screen.
  4. Follow the instructions on the screen to finish setting it up.
IT IS AMAZING:  You asked: Is Linux bad for SSDs?

How do I connect my DVD remote to my Samsung TV?

To operate your TV using the DVD player remote if you have a Samsung TV, press the [TV] button on the top of the remote, and then use the remote normally. You do not have to program a code into the remote.

How do I pair my remote to my Samsung Smart TV 2012?

Here’s how you can pair up your Samsung Smart TV with your Smart remote:

  1. Flip the remote. Take the remote and turn it to the other side. …
  2. Locate the down arrow. …
  3. Insert batteries. …
  4. Aim the IR sensor. …
  5. Press any button. …
  6. Wait for pairing to finish. …
  7. Press the Return and Extra buttons simultaneously. …
  8. Wait for pairing to finish.

Can you use a Samsung remote on any Samsung TV?

Your Samsung Smart Remote is designed to connect to your Samsung TV automatically to make the setup easier. You can sync the remote with a different Samsung Smart TV at any time if you’d like, but it will only work with one TV at a time.

Can you reprogram a Samsung TV remote?

Factory Reset for Samsung Remotes

Perform a factory reset for your Samsung TV remote by holding down the “B” and “C” keys on the remote until you see the remote light flash twice. Type in the code “981” to complete the reset. The TV remote can now be reprogrammed to your TV.

How can I control my DVD player without a remote?

If you can’t find your DVD player or Blu-ray player remote control, or it has stopped working, don’t despair. You can often still play media using buttons on the device itself. You can also use a universal remote or, with some models, a smart phone app to control the player.

IT IS AMAZING:  Can't find my Seagate external hard drive Mac?

How do you program a Dish remote to a DVD?

Point your DISH remote at the device you want to pair. Press and hold the button on the DISH remote that corresponds to the device you want to program (TV, DVD, or AUX). After about 10 seconds, you should see all four Mode buttons light up. When they do, release the button and it will start blinking.

How can I find TV code?

Find the code

  1. Open the YouTube app on your Smart TV or streaming device.
  2. Go to Settings .
  3. Scroll to Link with TV code. A blue TV code will show on your TV.
  4. Have your phone or tablet ready and continue with the steps in the “Enter the code” section below.