Quick Answer: Why does my DVD player not work?

How do you fix a DVD player that won’t play?

How to Fix DVD Won’t Play – 7 Solutions

  1. Solution 1: Check if the DVD type is incompatible with DVD player.
  2. Solution 2: Clean the dirty DVD or try a different disc.
  3. Solution 3: Ensure solid connection between DVD player and TV.
  4. Solution 4: Install Third Party DVD Player Software.
  5. Solution 5: Update DVD Firmware.

Why is my DVD player not reading the disc?

Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.

Why isn’t my DVD player working on my TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

IT IS AMAZING:  Is PS3 still a good Blu ray player?

How do you troubleshoot a DVD player?

How to Troubleshoot a DVD Player

  1. Check audio connections to make sure they’re secure.
  2. Replace the cable connecting the DVD unit to your receiver.
  3. Clean the contacts on the player and receiver with electronics-grade contact cleaner.
  4. Make sure DVD is clean and unscratched.

What to do if DVD is not reading?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

How do you reset a DVD player?

You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled “reset” or “Initialize mode” .

How do you fix a disc that won’t read?

Here are a few methods to try to fix your scratched disc at home:

  1. Rubbing Alcohol Method: Get a lint free non scratching cloth. …
  2. Toothpaste Method: Use a small dab of the gritty type of toothpaste. …
  3. Banana Method: Use a banana that is peeled and cut in half. …
  4. Skip Scratch Fixer Method: …
  5. Petroleum Jelly Method:

How do I get my DVD player to play on my TV?

To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.

IT IS AMAZING:  How do I remove an external hard drive from Time Machine?

How do I get my DVD player to play on my smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.