Why CD is not working in laptop?

What to do if CD is not reading in laptop?

In the Device Manager window, expand DVD/CD-ROM drives. Right-click the CD/DVD/Blu-ray drive that is listed, and then click Uninstall. Click OK to confirm that you want to remove the device. Restart your computer (Once the restart is complete, the Operating System will automatically install the required drivers).

How do I fix the CD drive on my laptop?

Boot to the Windows 10 desktop, then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. Exit Device Manager then restart your computer. Windows 10 will detect the drive then reinstall it.

Why my CD is not working?

Try testing the CD-ROM in Safe Mode. If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. After deleting the CD-ROM, reboot the computer.

Why is the CD not reading?

If multiple discs fail to be recognized, it’s likely there is a problem with the CD-ROM drive. … If you can boot from the disc, but Windows cannot read it, it indicates a problem with your drive or Windows rather than the disc. If you have a faulty drive, replace it. Try the disc in another computer’s drive.

IT IS AMAZING:  Which is better for streaming SSD or HDD?

How do I know if my CD drive is working?

How Do I Tell If My CD Drive Is Working?

  1. Check Operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. …
  2. Check the Drive. Click “Start” on the taskbar. Click “Computer” on the right side of the Start menu. …
  3. Check Device Manager. Click “Start” on the taskbar. Click “Control Panel.”

What causes CD-ROM failure?

If the power supply is not providing enough power to the disc drive, it can cause the disc drive to not be able to function properly. The disc drive may not be able to read CD or DVD without enough power. You can check the power supply to determine if it’s not working correctly.

How do I fix hard drive not detected?

What to Do When Your External Hard Drive Won’t Show Up

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book. …
  2. Try Another USB Port (or Another PC) …
  3. Update Your Drivers. …
  4. Enable and Format the Drive in Disk Management. …
  5. Clean the Disk and Start From Scratch. …
  6. Remove and Test the Bare Drive.

How do I fix my CD player that won’t read?

If the problem persists with the new disc, remove all discs and run a power cycle to reset the player. Remove any batteries or unplug it to drain the power. Restart after one minute and try a fresh disc. After closing the tray, press lightly on the tray to ensure it closes properly.

IT IS AMAZING:  Can I upgrade eMMC to SSD?

How do I fix my CD drive not reading discs?

Verify the drive status in Device Manager

Confirm the drive is listed in Device Manager, and then reinstall the device driver to resolve any error states. Verify that there is no disc loaded in the drive. In Windows, search for and open Device Manager. Double-click DVD/CD-ROM drives to expand the category.