Why does my portable DVD player have no sound?
Portable DVD player audio problems come from two main sources: dead built-in speakers or a processor problem. In the former case, resolving the issue involves finding and repairing any broken wires or plugs between the main board and the speakers. In the meantime, audio is typically available from the headphones.
Why does my Blu-Ray player have no sound?
Check the TV’s sound output mode to ensure the internal speakers are set to ON and that the volume is not muted. Try to unplug the Blu-ray Player, then plug it back in again. Test the A/V cable on a different device, or try to use a known working cable on this Blu-ray Player. If the issue persists, Scedule a Repair.
How do I get the sound to work on my DVD player?
Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.
How do I listen to DVD audio?
Most DVD players have only a 96kHz/24-bit digital-to-analog converter. So if you want to be able to listen to DVD audio discs, be sure to look for a DVD audio player with a 192kHz/24-bit digital-to-analog converter. DVD audio recordings can provide far better sound quality than CDs.
What can go wrong with a DVD player?
What Can Go Wrong with a DVD Player? Like CD players, DVD players are relatively trouble free. You can clean the machine, replace cords, and replace faulty motors, belts, and trays. More often, problems with DVD players are caused by faulty DVD discs, either damaged or dirty.
Why can’t I hear sound on my TV through HDMI?
Disconnect the HDMI cable from the HDMI input of the TV and connect the source device to a different TV. … If there is still no sound, perform a power reset on the TV . If there is still no sound after power resetting the TV, replace the HDMI cable.
Does HDMI carry audio?
Audio Quality :
HDMI is renowned for its video quality, but it also can carry audio without the need for multiple cables. HDMI supports Dolby TrueHD and DTS-HD for 7.1-channel sound for loss-less, theatre-quality audio. HDMI 1.4 also supports audio return channel, which sends sound from your TV tuner to your receiver.
Why is there no sound on my Samsung Blu-ray player?
No sound is heard when using the HDMI connection from the Blu-ray Disc player. Check the settings of HDMI Audio Output in System Settings. When HDMI Audio Output is set to HDMI2, check the connection of the HDMI OUT 2 jack on the Blu-ray Disc player and make sure that the connected device is turned on.
Do Blu-Ray players have audio outputs?
All Blu-ray players have an HDMI output to connect the player to your TV or receiver. … Many players offer optical or coaxial digital audio outputs for sending audio to an older home theater receiver or a sound bar.
How do I adjust the volume on my Sony Blu-ray player?
While your Blu-ray Disc player is on playback mode, press the OPTIONS button on the supplied remote control. Select Bluetooth Volume. Press the UP ARROW button or the DOWN ARROW button to adjust the volume of the connected Bluetooth device.
How do I enable HDMI audio?
- Right-click the volume icon in the system tray.
- Click “Playback Devices”
- Find your HDMI Output device, and either right-click it and select Enable, or open Properties and set “Device Usage” to “Use this device (Enable)”
Can you connect speakers to a DVD player?
To connect a DVD directly to a 5.1 system, you’ll need a pre-wired speaker package typically for computer use, with a powered subwoofer equipped with jacks for connecting all the speakers and inputs for the DVD player’s audio cables. A separate video cable from the DVD player is necessary for the TV connection.