How do I get my TV to recognize my DVD player?
To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.
How do I connect my DVD VCR combo to my TV with a cable box?
If you want the cable to VCR to TV, then connect the cable box to the VCR with either an coax (standard cable line) or composite (red, white, yellow) to the input on the back. Then run a coax or composite cable from the output on the back of the VCR to the input on the TV.
Why does my TV say no signal when I plug in my DVD player?
If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port. Sometimes cable can short-out. … Test if your DVD player works on other TVs. It could be your DVD player breakdown that leads to No Signal on your HDTV.
How do I connect my DVD player to my HDMI TV?
Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.
Can I run my DVD player through cable box?
You can’t hook a DVD to a cable box. It doesn’t have inputs. If the cable box is connected to the antenna jack on the TV and that’s the only connection you will need an AV RF modulator.
How do you hook up a VCR to a smart TV with a cable box?
Connect a second coaxial cable on the back of the cable box using the “RF OUT” and connect the other end of this cable to the back of the VCR using the “RF IN” jacks. Connect the third coaxial cable to the back of the VCR in the “RF OUT” with the other end connected to the back of the television’s “RF IN” jack.