How do I get the child lock off my Sony Blu Ray player?

How do I unlock my Sony Blu Ray DVD player?

How do I unlock my Sony Blu ray player disc tray?

  1. Using the supplied remote control, press and hold the STOP, HOME and TOP MENU buttons.
  2. When LOCKED or UNLOCKED appears on the display of the Blu-ray Disc player, release the buttons.

Why does my Sony Blu Ray player say locked?

This would be an indication that the Child Lock feature is enabled. Follow these steps to unlock or release the tray: Turn on the Home Theater System. Press the STOP button and the EJECT button simultaneously for five seconds.

How do I unlock my Blu Ray player?

Press and hold the PAUSE or the STOP button on the Blu-ray Disc player for approximately 10 seconds until LOCKED is displayed on the front panel display. NOTE: Depending on the model, you will have to press either the PAUSE button or the STOP button.

IT IS AMAZING:  What does ripping a DVD mean?

How do I reset my Sony Blu Ray player?

Follow these steps to perform a factory reset on your Blu-ray Disc™ player:

  1. On the supplied remote control, press the HOME button.
  2. Select Setup.
  3. Select Resetting or icon.
  4. Select Reset to Factory Defaults Settings.
  5. Select All Settings.
  6. Select Start.
  7. Select Close.
  8. Turn off your device, then turn it back on.

Why is my DVD player not opening?

Make sure the child lock feature is disabled. Try to open the disc tray. If the issue still occurs, power off your DVD player. Unplug the power cord for 30 seconds and then plug it back in.

How do I unlock my Sony Blu-ray home theater?

How do you unlock a Blu-Ray home theater system?

  1. Turn on the Home Theater System.
  2. Press the STOP button and the EJECT button simultaneously for five seconds.
  3. The message UNLOCKED will be displayed to indicate that DVD disc tray is unlocked.

How do you unfreeze a Sony Blu-Ray player?

To perform the power reset, press and hold the POWER button on the front of the Blu-ray Disc® player for 10 seconds. The Blu-ray Disc player should turn off. If it does not turn off, unplug the power cord from the electrical outlet. IMPORTANT: The Blu-ray Disc player may require a firmware update.

Why won’t my Blu-Ray player open?

Unplug the player, then hold the Power button for 20 seconds to discharge any lingering current in the Blu-ray player. Next, plug it back in, press Stop, and then try to eject the disc.

How do you hack a DVD player make it any region?

I checked out VideoHelp found the following region hack:

  1. Power on.
  2. Open tray.
  3. Push the info on remote once (with supplied remote). You will see numbers.
  4. Press 9 for multi-region. Keep trying until you see the number 9 appear in upper left corner.
  5. Power off.
  6. Power on.
IT IS AMAZING:  Will NVMe work in laptop?

How do I make my Blu Ray player multi region?

Region Free Hack Method 2: convert blu-ray player to multi region

  1. (Works with most Samsung , Panasonic Blu Ray and DVD players and other players)
  2. Power on DVD Player.
  3. Open the DVD tray.
  4. Push the info button on the remote one time.
  5. Numbers will appear.
  6. Press 9 for multi-region.

How do I change the region code on my Blu Ray player?

Change Blu-Ray Disc Regional Code Settings in PowerDVD

In the main PowerDVD menu, select Settings. In the Settings page, select BD Settings. Select the region you want from the Region Selection drop-down menu. The default setting is Region A.

How do I reset my blu-ray player without a remote?

How do I reset my Sony Blu-Ray player without a remote?

  1. Turn off and unplug the Blue-Ray player, let it rest for 30 seconds.
  2. Press and hold the open/close button on the front of the player, reconnect the power cord, then release the button.

How do I fix my Sony Blu-Ray player?

Power reset the Blu-ray Disc player.

  1. Remove the disc from the Blu-ray Disc player.
  2. Turn off the Blu-ray Disc player.
  3. Unplug the power cord of the Blu-ray Disc player from the electrical outlet.
  4. Let the player remain without power for one minute.
  5. Plug the power cord back into the electrical outlet.

How do I update my Blu-Ray firmware?

Power on the Blu-ray Disc player. If there is a disc in the player, please remove the disc. At the Home Screen menu, use the arrow keys on the remote control to select Setup – Software Update and then press the ENTER button. A New Software Version available message will be prompted.

IT IS AMAZING:  Quick Answer: How do I remove WD Unlocker from my Mac?