Quick Answer: How do I get my external CD drive to work?

Maybe the Drive Is Bad

Why is my external CD drive not showing up?

Restart the computer and Windows should auto-detect the drive and reinstall the drivers for you. If your hardware is not even showing up in the Device Manager, then you may actually have a hardware problem, such as a faulty connection or a dead drive. It’s worth checking this option out if the computer is old.

How do I fix my CD drive not reading discs?

Verify the drive status in Device Manager

Confirm the drive is listed in Device Manager, and then reinstall the device driver to resolve any error states. Verify that there is no disc loaded in the drive. In Windows, search for and open Device Manager. Double-click DVD/CD-ROM drives to expand the category.

How do I reset my external CD drive?

How to Reset a CD/DVD Drive

  1. Restart your computer. After it starts to back up, push the eject button on the DVD player if it was not working properly. …
  2. Find a small opening below the eject button on the outside of the drive. …
  3. Clean the laser lens on the DVD drive with the appropriate cleaner and a lint-free cloth.
IT IS AMAZING:  Does NVMe increase FPS?

Why is my disc drive not reading discs?

If multiple discs fail to be recognized, it’s likely there is a problem with the CD-ROM drive. … However, if the disc doesn’t work in any computer, it’s probably defective and should be replaced. Try cleaning the drive with a CD/DVD drive cleaning product.

How do I reinstall my CD drive?

In the System Properties window, click the Hardware tab. On the Hardware tab, in the Device Manager box, click the Device Manager button. In the Device Manager window, click the DVD/CD-ROM icon. Under the DVD/CD-ROM icon, click to select the drive to be reinstalled.

How do I know if my CD drive is working?

How Do I Tell If My CD Drive Is Working?

  1. Check Operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. …
  2. Check the Drive. Click “Start” on the taskbar. Click “Computer” on the right side of the Start menu. …
  3. Check Device Manager. Click “Start” on the taskbar. Click “Control Panel.”

When I put a CD in my computer nothing happens?

What’s most likely happened is that the “auto run” feature has been turned off – either on your system or on that specific drive. That means that by definition nothing happens when you insert a disc.

Why is my CD drive not working?

Update or reinstall the driver for the optical disk drive

Press the Windows key + R to open the Run dialog box. … In the Device Manager window, expand DVD/CD-ROM drives. Right-click the CD/DVD/Blu-ray drive that is listed, and then click Uninstall. Click OK to confirm that you want to remove the device.

IT IS AMAZING:  Is 256GB SSD storage good?

How do I connect an external CD drive to my laptop?

Insert one end of the USB cable into the external CD drive. Plug the other end of the cable into your computer’s USB port. Allow the computer to install the drivers for your external CD drive. Usually the computer will recognize the external drive and automatically install the drivers for the device.

How do you reprogram a CD?

Turn off the CD player. Press the ALL CLEAR or CLEAR button, then press and hold down the POWER button on the CD player at the same time. Hold these buttons down until the ALL CLEAR or ALL ERASE message is displayed. Play a CD to confirm the issue is resolved.

What to do if DVD is not reading?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.