Why is my hard drive not showing up when I plug it in?

What do I do if my hard drive is not detected?

What to Do When Your External Hard Drive Won’t Show Up

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book. …
  2. Try Another USB Port (or Another PC) …
  3. Update Your Drivers. …
  4. Enable and Format the Drive in Disk Management. …
  5. Clean the Disk and Start From Scratch. …
  6. Remove and Test the Bare Drive.

Why is my hard drive suddenly not detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.

Why can’t I see my drives in my computer?

Your USB disk may be corrupted, to check for a corrupted disk, plug the disk into another computer to see if the disk is seen in Windows Explorer on that computer. Make sure that you have the driver installed. If the device is still not seen in Windows Explorer on the alternate computer, the disk may be corrupted.

IT IS AMAZING:  Can Windows 7 run on SSD drives?

How do I detect my hard drive?

Go to the Control Panel, click on System and Security, then click Administrative Tools, then Computer Management. Click on Disk Management on the left side. Your drive should show up. From here, you can right-click on it and format it and assign it a drive letter.

How do I recover my hard drive?

Steps to Recover Data from a Corrupted or Crashed Hard Drive

  1. Download and Install Disk Drill for Windows or Mac OS X.
  2. Launch Disk Drill recovery software, select the crashed hard disk and click: …
  3. Preview the files you found with Quick or Deep Scan. …
  4. Click Recover button to recover your lost data.

How do I know if my hard drive is detected in BIOS?

During startup, hold F2 to enter the BIOS Setup screen. Under Disk Information, you can view all the hard drives installed on your computer. If you can’t see your newly-installed hard drive, please reinstall your hard drive. Ensure that bootable system files are present on the hard drive.

How do I fix a failed external hard drive?

Method 3. Run CMD to Repair Corrupted External Hard Drive Without Formatting

  1. Press Win+R, type: cmd and click Enter;
  2. Type: diskpart and hit Enter;
  3. Type: list disk and hit Enter;
  4. Type: select disk 0 and hit Enter; (0 stands for the drive letter of your corrupted external hard drive.)

Why can’t I find my external hard drive on Windows 10?

If the external hard drive is not showing up in Windows 10, it may be caused by the incompatible file system format. If there is no data on the drive, you can right-click the partition on the drive in Disk Management and select Format to format the drive to NTFS. But this will lost all data.

IT IS AMAZING:  Question: Should I full format a new hard drive?

How do I get my computer to recognize my Seagate external hard drive?

Turn off computer, disconnect Seagate external hard drive and connect it with another cable. If your Seagate external hard drive is detected, the original cable is the cause. If the problem still appears, connect the external hard drive to another USB port.

How do I fix Windows not detecting my hard drive?

Unplug the hard drive which fails to be recognized by Windows BIOS, and remove the ATA or SATA cable and its power cable. If the ATA or SATA cable and the power cable are broken, change to a new one. If the cables are covered by dust, clear the dust.

How do I enable my hard drive in BIOS?

Restart PC and press F2 to enter BIOS; Enter Setup and check system documentation to see whether the not detected hard drive is turned Off in System Setup or not; If it’s Off, turn it ON in System Setup. Reboot PC to check out and find your hard drive now.