Your question: Why does my TV say no signal when I plug in my DVD player?

Why is my DVD player not connecting to my TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

What do you do when your TV says no video signal?

Reset the box

  1. Turn everything off at the wall.
  2. Check that all cables are securely and firmly in place.
  3. Wait for 60 seconds.
  4. Plug your TV box (not the television set) in and turn it on.
  5. Wait another 60 seconds, or until the lights on the TV box have stopped flashing.
  6. Plug everything else back in and turn it all back on.

Why does my TV say no signal when everything is plugged in?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

IT IS AMAZING:  Frequent question: How do I enable NVMe in BIOS Asus?

What input should TV be on for DVD?

HDMI: The most modern connection, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and you only need one cord for both the audio and video. A/V Cables (Three-Prong): Standing for Audio/Visual cables, this the most common connection for DVDs.

How do I get my DVD player to play on my smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

What do you do when your HDMI says no signal?

Solution 2: Enable the HDMI connection setting

If you want to connect your Android phone or tablet to the TV, make sure the HDMI connection setting is enabled on your device. To do it, go to Settings > Display Entries > HDMI connection. If the HDMI connection setting is disabled, enable it.

Why does my TV say no signal when HDMI is plugged in PS4?

General HDMI Troubleshooting. Make sure the PS4 is connected to the correct HDMI port. … Try unplugging and re-plugging the HDMI cable in again to make sure you have a secure connection. If it’s connected to the correct port, you could switch it to another available port and try again.

IT IS AMAZING:  Is MBR limited to 2 TB?

Why does my Samsung TV say no signal when HDMI is plugged in?

Disconnect the HDMI cable from the back of the TV and the external device. Then reconnect it firmly to the external device first, then connect it to your TV. If it still doesn’t work, try the cable in a different port. Don’t forget to select the new source.

Why is my HDMI adapter not working?

Your USB to HDMI adapter may also stop working if its corresponding driver hasn’t been installed properly. In this scenario, you should try to download and install the latest driver at once. … After that, install the driver and restart your PC for the changes to take effect.