Your question: Why won’t my Sony Blu Ray player play sound?

Why is there no sound coming from my Blu-ray Player?

Check the TV’s sound output mode to ensure the internal speakers are set to ON and that the volume is not muted. Try to unplug the Blu-ray Player, then plug it back in again. Test the A/V cable on a different device, or try to use a known working cable on this Blu-ray Player. If the issue persists, Scedule a Repair.

Why is my Sony DVD player not playing sound?

Ensure the television or stereo receiver is not set to a MUTE or SPEAKER OFF setting. Ensure that the volume on the television or receiver is set to an audible level. Attempt to play a different disc in the DVD player. Try playing a different audio source through the television or receiver.

Why does my DVD player have picture but no sound?

Below are the possible reasons for ‘DVD works but no sound on TV’ (if you DVD player has sound but no picture, check here): … Your DVD player is set in mute mode or can’t recognize the selected audio track. 2. The cable (HDMI, scart or another kind of cable) you use to connect DVD player and TV is connected incorrectly.

IT IS AMAZING:  Your question: Can I mail an external hard drive?

How do I get sound from my Blu-ray Player to my TV?

To output sound from a TV, connect the TV to the HDMI OUT 1 jack of the Blu-ray Disc player and change the HDMI Audio Output setting to Auto or HDMI1.

How do I enable HDMI audio?

Answers

  1. Right-click the volume icon in the system tray.
  2. Click “Playback Devices”
  3. Find your HDMI Output device, and either right-click it and select Enable, or open Properties and set “Device Usage” to “Use this device (Enable)”

Do Blu-Ray players have audio outputs?

All Blu-ray players have an HDMI output to connect the player to your TV or receiver. … Many players offer optical or coaxial digital audio outputs for sending audio to an older home theater receiver or a sound bar.

Why is audio not working through HDMI?

Disconnect the HDMI cable from the HDMI input of the TV and connect the source device to a different TV. … If there is still no sound, perform a power reset on the TV . If there is still no sound after power resetting the TV, replace the HDMI cable. Perform a factory reset .

How do I get the sound to work on my DVD player?

Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a Digital Audio (Optical) cable.

Why does the sound not work on my TV?

Check the audio settings on your TV and connected devices. Turn off and unplug your TV and connected devices. … If so, it may have been an issue with the HDMI sound not working on the TV. Swap out the media device for another one, or change the TV’s speaker output to the internal speakers to see if it fixes the sound.

IT IS AMAZING:  Best answer: Does VivoBook 15 support NVMe SSD?

Why does my VCR have no sound?

Make sure the coaxial cable is connected to the UHF/VHF OUT out on the VCR. … Make sure the other end of the coaxial cable is connected to the UHF/VHF IN on the TV. Make sure an Audio/Video (A/V) cable is connected to the AUDIO/VIDEO OUT on the VCR.

Does HDMI carry audio?

Audio Quality :

HDMI is renowned for its video quality, but it also can carry audio without the need for multiple cables. HDMI supports Dolby TrueHD and DTS-HD for 7.1-channel sound for loss-less, theatre-quality audio. HDMI 1.4 also supports audio return channel, which sends sound from your TV tuner to your receiver.

How do I adjust the volume on my Sony Blu-Ray player?

While your Blu-ray Disc player is on playback mode, press the OPTIONS button on the supplied remote control. Select Bluetooth Volume. Press the UP ARROW button or the DOWN ARROW button to adjust the volume of the connected Bluetooth device.

How do I connect my Blu-Ray player to my TV without HDMI?

Plug one end of the red and white composite audio cables into the “Audio Out” ports on the Blu-ray player, matching the colors, and insert the other ends of the cables into the “Audio In” ports on the input panel of the TV.

Do all Blu-ray players sound the same?

So referring back to the original question, yes, if you use a Blu-ray player’s HDMI or digital audio output all Blu-ray and DVD players will sound exactly the same.

IT IS AMAZING:  Question: Are WD Elements drives good?